Ensuring the Safety of Your Safe Room – A DIY Guide

A short guide on inspecting the safety of your protected room (Mamad). 

I hope you find it useful in making sure everything is up to snuff. If you have any questions or need further assistance, feel free to reach out.

Check the Door’s Integrity:

Handle: Ensure the handle is securely fastened and not loose.

Closure: The door should close smoothly and with minimal effort.

Seals: Examine the rubber seals around the door. To test, turn off the lights, close the door, and check for any light leakage. If light seeps through, the seals might need replacement.

Frame: Tap around the door frame (sides, top, bottom) to ensure there are no hollow areas—solid concrete should be felt.

Inspect the Mamad Window:

Operation: Make sure you are familiar with how to operate the window.

Frame: Verify that the window frame is filled with concrete. Tap around the frame to confirm this.

Sealing: Ensure the window can be sealed against gasses. For new apartments, the steel window should provide both gas and explosion protection. Close the window and check for light penetration; you might need to remove the glass to inspect the seal. For older apartments, ensure the window seals properly.

Verify the Air Filter Box (Protection from toxic gasses):

Functionality: Confirm that the air filter box is present and operational.

Air Intake: Check that the outer opening for air intake is clear and unobstructed.

Outlet: Make sure there is an active electrical outlet for connecting the filter.

Check for an Air Valve

Presence: Ensure the room has a properly functioning air valve.

Additional Considerations:

Size Requirements: The safe room should be at least 9 square meters. It must include an explosion-proof door, a sealed window, electrical outlets, and communication points.

Maintenance: Avoid altering or disassembling components, including the door and window. Avoid drilling holes in the walls.

Ventilation Pipes: Check that rubber seals are intact, and screws are secure.

Safety Measures: Refrain from hanging glass or ceramic items that might shatter. Do not store flammable, dangerous, or toxic materials. Gas cylinders should be kept at least 3 meters away from Mamad walls.

By following these simple steps, you can ensure that your Mamad is in optimal condition to provide safety and protection in case of an emergency. Regular inspections and maintenance are essential for the integrity of your safe room, giving you peace of mind that it will perform as needed. Remember, preparedness is key to safety, so don't hesitate to reach out if you have any concerns or need further guidance. Stay safe and proactive!